Door Handle Replacement
It's worth it to replace door handles if you aren't happy with the way they look, or if they are difficult to use. With a bit of patience, you can put in an entirely new handle in a short time.
Modern door handles are often equipped with cover plates that hide the screws to give them a more attractive appearance. If your new handle does not have screws already attached, you will have to attach them separately.
Remove the old handle
Door handles aren't just an important for their aesthetic value to your home, but they're vital for safety since they allow you to lock and unlock your door. However, over time your door handle can lose its grip, feel loose, or appear old and worn out. This is an indication that it's time for a replacement.
If your door handle is becoming difficult to use, it could be time to replace it. This is a problem since it means that you are unable to not lock or unlock your door, which could be a security risk for you and your family.
Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle could be quite dangerous, especially when your children or elderly family members have difficulty opening it, and get trapped within. It's a good thing that it's simple to fix a damaged door handle by simply replacing the handle that was broken.
Modern door handles are generally standard sizes and should fit any door. If you're not certain if your new door handle will work, take off the old one and take measurements of its holes in the housing. This will allow you to purchase the correct size door handle.
It is the easiest way to take off the old door handle by unscrewing it from the door. This is typically done with a screw driver. However, some door handles have a cover plate that conceals the mounting screws so you'll need to remove this to reach the screws beneath. Once you have removed the old handle, take a note of how the spindle is attached so that you can align it when you fit the new one.
Alternately, you can take off the door handle by uncrewing it from the latch mechanism. You can use a screwdriver for removing the door handle. But, you'll need to locate the small latch that is located on the edge cut piece. After taking off the latch, remove the handle and the strike plate. Then remove the latch from the edge of the door.
Remove the Strike Plate
If you are replacing the handle, you'll need to replace the latch plate, which holds the hole which the door's latch hooks into when it closes. The box that the new handles arrive in will include two latch plates - either a rectangular or circular (see the diagram above for the parts of the door handle). If you have an rectangular latch plate, replace it with a round one. This will allow the latch to hook onto the strike plate, making the handle more convenient.
The first step is to loosen the screw that's holding the latch plate that was previously in place. The screws can be very tight and will require some force to loosen. It might be beneficial to have a second person help with this task if you can.
After the screws are removed the latch should slide out of the door easily. If the latch plate is stuck or won't move, use a small file to scrape the edges. This will sometimes free the plate.
Now, you can proceed to preparing the new door strike plate to be installed. Utilizing the screws made of wood that came with your new handles, screw the latch plate onto the inside of the doorjamb. Do not tighten the screws too much as this can damage the strike plate.
If you're not sure whether the latch plate is in the correct position Try closing and opening the door to determine whether it locks and closes correctly. If it doesn't you'll have to adjust the strikeplate either up or down or forward or back until the door shuts properly.
If the door is jiggling or moving, it may be necessary to expand the hole for latching in the strike plate. This is more frequent on older doors. It can be caused by wear and tear, hinges that are too shallow, the incorrect size of the latch or damaged strike plate. If this is the case, follow the same procedure as adjusting the strike plate, but using a metal file instead of an hammer and chisel.
Removal of the Latch
The latch is the angled metal piece that slides in and out of the hole on the inside edge of your door. The latch is pushed forward when you turn the handle. It also connects to a hole in the frame of the door to keep your door closed. If your door shakes when you close it, replacing the latch could be all you need to fix the problem.
The screws that hold the door latch are difficult to locate however, you can insert a screwdriver into an insignificant hole on the trim plate and then pry the latch off. After you've removed the trim plate, it'll be easy to remove the latch and the remaining bolts that hold the spindle and latch in place.
If the latch won't be released it is suggested to use the clip of a paper or tool to spring it loose from the handle mechanism. Insert the item in the recessed latch slot, and gently twist it or jiggle until the that the latch and handle begin to split. You may need to repeat this several times before the latch becomes loose enough to pull out.
You should be able to slide the new latch into its slot with no problems after you have removed the old one. Use your new screws to secure the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot, aligned with the screw chambers.
Before installing window handles , be sure to measure your current backset (the distance from the centre of the big hole on the front of the door to the edge). Also, ensure whether the size of the latch on the new handle is a good match to the measurement of your existing handle.
You'll require a brand new cylinder for your lock if replacing the handle and latch or your existing one is damaged. If you are not changing locks, a new lock should fit inside your existing recess, and also work with the keys you have already. Select a latch with rectangular cover plates to match your existing handles.
Removal of the Cover Plate
Door handles can start to look worn over time However, if you replace them with a contemporary lever on rose design it's a simple and quick DIY project to decorate and can improve the overall appearance of your home. You can purchase complete sets of door handles that come with the appropriate escutcheons and privacy adjustor kits.
The first step to replace the door handle inside is to remove the cover plate or rose, which conceals the screws and inner mechanism. Use a flathead for removing the plate. It could have an opening on one edge or be secured by a pin.
Remove the screw holding the handle inside and place it aside when the cover plate has been removed. Remove the screws that hold both the inner and outer plates. You can loosen them using a Philips Screwdriver. Then, take the inner plates and latch plate from the door and set them aside.
Not all doors have this gap. If yours does not have a handle, you'll need to drill a hole in the door for the new handle. The procedure to do this is similar to the procedure for opening a door with locks, but you'll need to take extra care not to damage the door or frame.
After drilling the holes after which you'll have to put in new door knob screws. Be sure to purchase the same size as the old ones, so you do not end up with the handle that is too tight or too loose. Installing a new strike rod and latch is also mandatory. These are not included in most door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great choice if you're in the market of a high-quality interior door handle replacement set. It's a factory fit and has received hundreds of five-star reviews from delighted customers. It's a great choice to replace damaged or worn door handle hardware in the interior of your Chevy HHR.